Fabricator Welders TIG, MIG

Fulcrum Engineering & Technical are acting as a Employment Business on behalf of our Clients in the Brentwood, Basildon, Canvey areas.

We are recruiting personnel at all levels and covering similar Welding Fabrication roles depending on applicants skill sets & experience.

Working mainly in the Fab Shop plus some Site Work as required.

Fabricator Welders will be more involved with fabrication work plus higher spec welding work with TIG.

Sheet Metal Fabricator Welders & Welder Fabs working on the fabrication from engineering drawings & welding angle, box, tube to high spec finish. Welders TIG mainly working mainly on welding sheet metal 1.5 - 4 mm stainless or mild steel, ali, mild steel angle, box ideally able to weld pipe & tube with TIG or MIG.

Also semi skilled applicants can apply if they can cover most of the work depending on their skill set

Quals/Skills = Able to fabricate & weld with TIG mainly & some MIG depending on skills levels, or weld with MIG and some TIG

Ideally C & G or NVQ Welding Fabrication or Sheet Metalwork

Ideally - Use Tube Bending Machine & Press Brake & other Work Shop Machinery & Tools

Hours = 0730 to 1630 or 1730 40 to 50 hours Mon to Fri as required

Also 0600 or 0700 to 1330 Sat as required

Term = Temp Contract 6 to 13 weeks & Temp to Perm 13 weeks with good chance of perm role after 13 full weeks

Perm = £19 + Hr Basic May be some direct perm roles if the applicant is working and has to give notice

Pay Temp Contract = £22.50 + per hr up to 60 hrs £27 + per hr Sat Depending on Skills/Quals